top of page
All Posts


Does a winch need a LOLER inspection?
Only if it lifts - A winch that raises or lowers a load is lifting equipment and needs a LOLER thorough examination at least every 12 months, or every 6 months if it lifts people. A winch that only pulls a load along the ground isn’t covered by LOLER, but it still needs inspecting and maintaining under PUWER. Winches are one of the most common “do we or don’t we?” questions I get. The same piece of kit can be lifting equipment on one job and not on the next, depending on what
Ryan Leavesley
2 days ago7 min read


Do conveyors need a PUWER inspection?
Yes, in most cases they do. Conveyors are work equipment under PUWER, and Regulation 6 requires inspection wherever wear could make them dangerous. No law sets the interval, so you base it on use and the manufacturer’s instructions. Fire shutters or curtains where a conveyor passes through a fire wall need their own checks under fire safety law. Conveyors look harmless - They’re slow, they’re quiet, and the people working next to them stop noticing them... And that’s exactly
Ryan Leavesley
2 days ago7 min read


Do ladders, stepladders and podium steps need inspecting?
Yes, if they’re used at work. The Work at Height Regulations 2005 require ladders to be inspected at suitable intervals, with the results recorded. HSE expects a pre-use check by the user each working day, plus a recorded detailed inspection at fixed intervals by a competent person, following the manufacturer’s instructions. Ladders are everywhere. Warehouses, schools, care homes, pub cellars, garages and roof hatches in blocks of flats all have them. Plenty of workplaces hav
Ryan Leavesley
3 days ago8 min read


Automatic gates and car park barriers: who has to inspect them, and how often?
If you control powered gates or barriers on a commercial site or a shared residential development, the law requires you to keep them safe and maintained. No law sets a fixed interval. Common practice is a service every 6 months and a recorded inspection at least once a year, including force testing of the closing edges. In the summer of 2010, two children died after becoming trapped in powered gates. HSE found the same two failings in both cases: nothing detected the child at
Ryan Leavesley
3 days ago8 min read


Does playground equipment need a PUWER inspection?
Usually not - PUWER covers equipment used for 'work', and HSE says it doesn’t apply to equipment provided for the public, so children at play aren’t covered. Your duty comes from the Health and Safety at Work Act and the Occupiers’ Liability Acts. Most schools and councils meet it by following BS EN 1176: regular checks plus an independent annual inspection. I get asked about playground equipment by schools, care homes, pubs and managing agents, and the question is nearly alw
Ryan Leavesley
3 days ago8 min read


PUWER regulations explained: who they apply to and what counts as work equipment
PUWER, the Provision and Use of Work Equipment Regulations 1998, applies to anyone who provides work equipment, uses it at work or controls how it’s used. That includes landlords and managing agents as well as employers. It covers almost anything used for work, and requires equipment to be suitable, maintained, inspected where needed and used by trained people. Most of the PUWER questions I get aren’t about the regulations themselves. They’re about whether the regulations app
Ryan Leavesley
3 days ago9 min read


Does gym equipment need a PUWER inspection?
Yes - If you provide gym equipment for staff to use, PUWER requires you to keep it in good repair (Regulation 5) and to have it inspected where it could deteriorate dangerously (Regulation 6). No law sets a fixed interval, so your risk assessment decides. If members use it too, your duty to them comes from the Health and Safety at Work Act. A gym floor is hard on equipment. A treadmill belt runs for hours a day, a cable takes a tug every few seconds, and a bench gets dropped
Ryan Leavesley
4 days ago5 min read


What happens when you book a LOLER or PUWER inspection with PULO
If you’ve never booked an examination before, or you’re thinking of switching from the firm that maintains your lifts, you probably want to know what you’re signing up for. Here’s the whole process, start to finish. You enquire, Ryan quotes a fixed price, one engineer surveyor examines your equipment, and you get a signed report for each item, usually with photos. 1. You tell us what you’ve got Use the contact form, ring 07412 957 441 or email technical@pulocompliance.co.uk.
Ryan Leavesley
4 days ago3 min read


Do lifting beams and lifting eyes need a LOLER inspection?
It depends whether they move. Lifting beams, spreader beams and removable lifting eyes or eyebolts are lifting accessories, so they need a LOLER thorough examination at least every 6 months. Eyes welded to a load or built into a machine, and fixed anchor points in a building, are different, but they still need checking. Most people know slings and shackles are on a 6-month clock. Lifting beams and eyes are where it gets blurry, because the same word, “lifting eye”, can mean a
Ryan Leavesley
Nov 46 min read


Does a dumbwaiter need a LOLER inspection?
Yes, if it’s used at work. A dumbwaiter is lifting equipment, so LOLER requires a thorough examination by a competent person at least every 12 months, because it only carries goods. It’s 6 months only if anyone rides in it, and no one should. Your lift company’s service doesn’t count as the examination. A dumbwaiter, also written dumb waiter and sometimes called a service lift, is a small lift for moving food, laundry, stock or paperwork between floors. You’ll find them in pu
Ryan Leavesley
Nov 46 min read


Who is responsible for hired lifting equipment?
Both of you (the owner and the person hiring), but the legal duty sits with the user. The hire company usually arranges the thorough examinations, but HSE says the responsibility in law rests on the person using the equipment. You mustn’t use hired lifting equipment without evidence of its last thorough examination, so ask to see the report first. When you hire a telehandler, a MEWP, a crane or a set of slings, the hire company owns it and usually looks after its examinations
Ryan Leavesley
Nov 46 min read


Does lifting equipment need re-examining after a move or repair?
Sometimes - LOLER requires a fresh thorough examination before use after equipment is installed or reassembled at a new location, and after exceptional circumstances such as damage, failure, a major repair, a modification or a long time out of use. A routine service on its own isn’t one of them. Your lifting equipment has a normal examination date: every 6 months or every 12. But that isn’t the only time it needs one. Some events can’t wait for the next date, and the rule is
Ryan Leavesley
Nov 46 min read


Does a platform lift need a LOLER inspection?
Yes, if it’s used at work. A platform lift carries people, so LOLER requires a thorough examination by a competent person at least every 6 months, and before first use if it was assembled on site. A lift only the public use isn’t always strictly covered, but HSE still expects it to be kept safe. A platform lift is the lift people forget about. It might be a vertical lift at the back of a church hall, a step lift in a school corridor or an inclined platform alongside a stairca
Ryan Leavesley
Nov 47 min read


Does farm machinery need a LOLER inspection?
Yes, most of it. Tractor foreloaders, telehandlers, forklifts, workshop hoists, jacks and cranes on lorries or fertiliser spreaders are all lifting equipment and need a LOLER thorough examination at least every 12 months. Slings, chains and anything lifting people need one every 6 months. A tractor’s three-point linkage is the main exception. On a farm, lifting is everywhere! The foreloader on the tractor, the telehandler in the yard, the chain block in the workshop and the s
Ryan Leavesley
Nov 36 min read


Do car jacks and engine cranes need a LOLER inspection?
Yes, if you use them at work. Workshop trolley and bottle jacks and engine cranes are lifting equipment, so they need a LOLER thorough examination at least every 12 months. Slings and chains used with them need one every 6 months. Axle stands don’t lift anything, so they aren’t LOLER, but HSE says to have them inspected every year. Walk round most workshops and the lifting equipment you notice is the vehicle lift. Fair enough, it’s the big one. But the trolley jack by the doo
Ryan Leavesley
Nov 36 min read


Does a goods lift need a LOLER inspection?
Yes. A goods lift is lifting equipment, so it needs a LOLER thorough examination by a competent person at least every 12 months if it only carries goods, and at least every 6 months if anyone rides in it. That covers mezzanine lifts, pallet lifts and service lifts. Your maintenance contract doesn't count as the examination. Goods lifts get overlooked because they're installed as part of something else. A mezzanine goes in, a lift goes with it, and the paperwork that comes wit
Ryan Leavesley
Nov 36 min read


What are the penalties for not having a LOLER inspection?
There's no fixed fine for a missed LOLER inspection. Not having the thorough examination breaks the law even if no one is hurt, and HSE can give advice, charge for its time, serve a notice or prosecute. A court can set an unlimited fine, based on the risk created and the company's turnover, and individuals can be given a custodial sentence. I'd rather tell you what actually happens than frighten you with the biggest figure I can find. Most overdue examinations never get anywh
Ryan Leavesley
Nov 36 min read


Will a LOLER examiner report me to the HSE?
Only if they find a serious risk. An examiner must tell you straight away about any defect that is or could become a danger. They only send a copy of the report to the enforcing authority, HSE or your local council, where there’s an existing or imminent risk of serious personal injury (LOLER Regulation 10). Anything less stays with you and, if the equipment was hired, the hire company. It’s a fair worry - You’re paying someone to look at your equipment with a critical eye, an
Ryan Leavesley
Nov 36 min read


What's the difference between a thorough examination and a pre-use check?
A pre-use check is a quick look the operator does before using equipment, to spot obvious damage or faults. A LOLER thorough examination is a detailed check by an independent competent person, at least every 6 or 12 months, that ends in a written report. Neither replaces the other. An in-date examination doesn't excuse a skipped pre-use check, and a daily check doesn't count as a thorough examination. It's an easy mix-up to make, because all of these ended up getting called "
Ryan Leavesley
Nov 37 min read


What should a LOLER report include?
LOLER Schedule 1 lists what every report of thorough examination must contain: who and where it was for, exactly which item was examined, its safe working load, why it was examined, whether it’s safe to use, any defects and the date to fix them, the latest date for the next examination, any tests, and who carried it out and when. A sheet that just says “pass” isn’t enough. Most people call it a LOLER certificate. The law calls it a report of thorough examination, and the name
Ryan Leavesley
Oct 305 min read
bottom of page